Description
VibroFiltr 12mm Acoustic Felt
The 12mm version of VibroFiltr’s high-density, pressed non-woven fibre felt. The extra thickness absorbs more airborne noise and adds more thermal insulation than the 8mm felt. You can stack layers to fill deeper cavities (site). It’s a self-adhesive final layer over sound deadening mats or ST-Mat.
For dry areas only.
Specifications
- Sheet size: 800 × 500 mm (0.40 m² per sheet) (site/VF)
- Coverage: 2.5 sheets per m²
- Sheet weight: 0.45 kg (VF)
- Material: pressed non-woven fibre felt with one-sided adhesive layer (site/VF)
- Colour: may vary (site)
Where to use it
Floor, bulkhead (cabin side), dashboard, boot, inner wheel arches, roof and door cards (VF). InShop examples: second layer over 1.5mm mat on van door cards; back-seat area, wheel arches and transmission tunnel on a full interior (site).
How to install
- Clean the surface of dust and grease.
- Cut to shape with a sharp knife.
- Peel off the backing and press firmly into place. Add further layers to fill deeper gaps.
